Event Calendar

Tuesday, February 27, 2024

End-of-Project Webinar: Connector Reliability Test Recommendations, Phase 3 - Session 2

Start Date: 2/27/2024 11:00 AM EST
End Date: 2/27/2024 12:00 PM EST

Location:
United States 

Organization Name: iNEMI

Contact:
Mark Schaffer
Email: marks@inemi.org
Phone: (984) 333-0820

The iNEMI Connector Reliability Test Recommendations Project, Phases 1 through 3, addressed the need for a standardized reliability evaluation method for connectors. Existing connector reliability testing standards do not address the full range of connector applications nor have the necessary detailed, defined test conditions and sequences for them.
 
Phase 1 defined levels of interconnect (connector level) and recommended a physics of failure test approach. In Phase 2 the team defined a set of stress levels and specific test conditions to use when evaluating connector performance.
 
In Phase 3, the team modified the methodology defined in Phase 2 and applied it to two types of connectors: USB-C and SP3 socket. The intention of the modified testing methodology was to perform “tests to failure” to then allow reliability estimates to be calculated. 
 
The end-of-project webinar will review the development of the test cycles for the connector types addressed, discuss the actual testing and results, plus identify lessons learned and possible next steps.
 
Registration
 
This webinar is open to industry; advance registration is required (see links below). Two sessions are scheduled (with the same content). If you have any questions or need additional information, please contact Mark Schaffer (marks@inemi.org).
 
Session 2: US & Europe
Tuesday, February 27
11:00 a.m. — 12:00 p.m. EST (US)
5:00-6:00 p.m. CET (Europe)
Register for this webinar

Session 1: Asia
Tuesday, February 27
10:00-11:00 a.m. CST (China)
9:00-10:00 p.m. EST (US) on February 26
Register for this webinar